Interior Demolition in Toronto
MetroPoint removes selected interior finishes and assemblies so renovation trades can begin from a clearly defined space.
Is this the right scope?
Clear rooms for renovation while keeping the building.
Interior demolition can take several rooms back to framing. A room-specific scope defines a smaller work boundary; structural changes require a separate assessment.
Changing the building itself? Review structural work ↗Where this scope stops
Removing finishes does not confirm that framing can be removed. Abatement and reconnection of building services are separate responsibilities.
Define these items in writing
- Selected non-structural walls and ceiling finishes
- Flooring, cabinets and fixtures identified for removal
- Protection, debris removal and handover condition agreed in writing
What assessment needs to establish
- Rooms and surfaces to remove versus retain
- Occupied areas and the debris route
- Survey findings and services behind finishes
About this service
Interior demolition can range from removing one room's finishes to taking a building back to framing. Typical scopes identify walls, ceilings, flooring, cabinets, fixtures and other non-structural elements for removal. The written scope also records doors, windows, floors, services and adjacent rooms that must remain protected.
Before work begins, the owner and project team must provide the information required for designated substances under Ontario's OHSA. Suspect asbestos-containing materials should not be disturbed until the applicable assessment and Ontario Regulation 278/05 requirements have been addressed. Electrical, plumbing and mechanical items are isolated or disconnected by the appropriate parties where needed.
The crew establishes a controlled work area, completes the agreed removals and separates debris for loading. Access routes and occupied parts of the property are considered during sequencing. After removals are complete, the exposed area is checked against the scope and swept for handover. A site visit is the best way to distinguish straightforward interior removal from structural or hazardous-material work that needs additional documentation.
How the work runs
- 01
Review the site
We document access, retained elements, nearby occupied areas and the materials included in the requested scope.
- 02
Confirm requirements
Permit, utility and designated-substance requirements are identified before affected work begins.
- 03
Protect and remove
The crew installs the planned protection and completes removals in the written sequence.
- 04
Load and hand over
Removed material is sorted, loaded and taken to appropriate receiving facilities before a final sweep.
Visible work examples
Wall finish removed during interior demolition Interior taken back to framing Interior demolition exposing wall framing Interior space prepared for renovation Interior framing after finish removal Interior demolition completed to framing
Related services
Questions and answers
- What is included in interior demolition?
- It depends on the written scope and can include selected walls, ceilings, flooring, cabinets and fixtures.
- Can some finishes stay?
- Yes. Retained finishes and rooms are identified during the site review so protection can be included in the scope.
- What if asbestos is suspected?
- Affected material must be assessed and the applicable Ontario Regulation 278/05 requirements addressed before it is disturbed.
- Do you remove the debris?
- Yes, when disposal is included in the written scope, debris is loaded and taken to appropriate receiving facilities.
Get a scoped estimate
Request an on-site assessment and a written scope before work begins.
Licensed, insured and WSIB-registered, carrying $5M commercial general liability.
Next step
Tell us about your interior demolition project
This service is selected for you. Change it if another scope fits better, or choose the advice option. Share the removal limits, property location and anything that must remain.
Get a Free Quote
Tell us what goes and what stays.
Plan the wider project
Compare the removals, retained areas and next-trade responsibilities for your project.
Office and tenancy
Hospitality and retail
- Food-court strip-out: the counter, kitchen and shared building
- Grocery-store refurbishment: fit-out removal after refrigeration work
- Automotive showroom refurbishment: the ordinary demolition package
- Commercial laundry refit: when does the building need demolition?
- Theatre and cinema refurbishment: defining ordinary interior demolition
Retained structures and concrete
Homes and shared buildings
- Demolition packages for several lawfully vacant apartments
- Joining two condo units: defining the interior demolition
- Whole-house interior demolition before a major renovation
- Demolition when a divided house becomes one home again
- Interior demolition within an apartment riser replacement
- Interior removal for an energy-led home renovation
- Interior demolition for an accessible-home renovation
- Demolition before a retained garage becomes living space
- Toronto rental renovation licensing before an interior removal
Special-use interiors
- Ordinary demolition after a fire or water-loss release
- Demolition for a private training-centre refit
- Demolition within a vacant childcare-premises renovation
- Community-facility refurbishment: ordinary rooms and retained building features
- Pool-area refurbishment: ordinary interiors around a retained pool
- The demolition contribution to a commercial-to-residential conversion